Skip to main content
Download PDF
  • Research article
  • Open access
  • Published:

Inhibition of pathogenic bacterial biofilms on PDMS based implants by L. acidophilus derived biosurfactant

BMC Microbiology volume 19, Article number: 39 (2019) Cite this article

Abstract

Background

Lactobacillus spp. predominantly shows its presence as a normal mucosal flora of the mouth and intestine. Therefore, the objective of our research is to investigate the in-vitro conditions for the prospective of medically valuable biosurfactants (BSs) derived from Lactobacillus spp. Biosurfactant (BS) obtained from Lactobacillus spp. exhibit antibiofilm and antiadhesive activity against broad range of microbes. In the present study we investigated the production, purification and properties of key components of the cell-associated-biosurfactant (CABS) from Lactobacillus acidophilus NCIM 2903.

Results

Extracted, purified, freeze-dried CABS shows reduction in surface tension (SFT) of phosphate buffer saline (PBS @pH 7.0) from 71 to 26 mN/m and had a critical micelle concentration (CMC) of 23.6 mg/mL. The CABS showed reduction in interfacial tension (IFT) against various hydrocarbons and had effective spreading capability as reflected through the decrease in contact angle (CA) on different surfaces (polydimethylsiloxane - PDMS, Teflon tape, glass surface, polystyrene film and OHP sheet). The anionic nature of CABS displayed stability at different pH and temperatures and formed stable emulsions. Thin layer chromatography (TLC) and Fourier transform infrared spectroscopy (FTIR) revealed CABS as glycolipoprotein type. The Sodium Dodecyl Sulphate Polyacrylamide Gel Electrophoresis (SDS-PAGE) showed presence of multiple bands in a molecular range of 14.4 to 60 kDa, with prominent bands of 45 kDa. The CABS has significant antiadhesion and antibiofilm activity against tested bacterial strains.

Conclusion

The current challenging situation is to develop methods or search for the molecules that will prevent the formations of biofilm on medical bioimplants of PDMS based materials. These findings are supportive for the use of Lactobacilli derived BS as potential antiadhesive agent on various surfaces of biomedical devices.

Background

Biosurfactants (BSs) are amphiphilic molecules produced by diverse microorganisms such as bacteria, fungi and yeasts at the microbial cell surface or excreted out with pronounced surface and emulsifying activities [1,2,3]. These molecules possess a tendency to accumulate at the interface between liquid phases that show different degrees of polarity and hydrogen bonding, like oil-water or air-water, and reduce the surface and interfacial tension [4]. Microbial biosurfactant (BS) reveal a wide diversity of chemical structures, viz., glycolipids, lipopeptides, polysaccharide–protein complexes, lipopolysaccharides, fatty acids, phospholipids, and neutral lipids [5], therefore, it is reasonable to expect diverse potential applications for different groups of BS in industrial, environmental, biomedical and therapeutic purposes [4, 6, 7]. BS are utilized in various industrial domains including food and cosmetic industries. Extraordinary properties like (i) emulsification (ii) de-emulsification (iii) dispersion (iv) foam formation (v) moisturizing effects are the center of attractions to many researchers. Due to their other properties like (i) pore formation ability and (ii) destabilization of biological membrane; BS are widely explored as antimicrobial, antiviral, antitumor, hemolytic and insecticidal agents in therapeutics. Additionally, other attractive features like (i) viscosity reduction, (ii) hydrocarbon solubilization and (iii) metal sequestering abilities of BS present them as a potential candidate for environmental applications [8].

The BS synthesis has been reported by various genera of bacteria, viz., Pseudomonas, Bacillus, Acinetobacter, Arthrobacter, Rhodococcus, Clostridium, Halomonas, Lactobacillus, Leuconostoc, Myroides, and Serratia, also in some genera of yeast viz., Debrayomyces and Rhodotorula [3]. Lactobacillus gained importance in biomedical and therapeutic field for the exploration of BS synthesis due to two reasons, (i) they constitute an important part of natural microflora [9] and (ii) they possess antiinfective properties [10]. Whereas the indigeneity of Lactobacillus in the microflora of healthy human play a key role in maintaining stability and diversity of the gut microbiome [11], the antiinfective properties of Lactobacillus prevent the enteropathogen-mediated infection by competing for nutrients and binding sites (e.g., inducing intestinal mucin gene expression), by secreting antimicrobial substances such as (i) organic acids, (ii) H2O2, (iii) bacteriocins and reducing gut pH and producing BSs, eventually by counteracting the spread within the colonized body [12]. Unlike BS derived from Lactobacillus, BS derived from other microorganisms may raise the issue of health risk. For example, Serratia marcescens produce serrawettin which plays some role in the virulence of this species [13]. Likewise, Pseudomonas strains producing rhamnolipids exhibit pathogenic potential, suggesting that these biomolecules may contribute to its opportunistic pathogen characteristics [14]. Therefore, synthesis of BS from Lactobacillus is a subject of research interest. Different species of Lactobacillus viz., L. plantarum [15], L. agilis [16], L. paracasei [17], L. pentosus [18], L. casei [19], L. helveticus [20], L. fermenti [21], L. rhamnosus [21], L. acidophilus [22] have been reported for synthesis of various types of BS, such as glycoprotein, glycolipid, glycolipoprotein. Lactobacillus derived BS are increasingly applied as antiadhesive agents in therapeutic field, which play an important role in the prevention and control of infections caused by biofilm forming pathogens from various groups of microbes [23,24,25]. Biofilms are communities of microorganisms that are encased in a self-synthesized extracellular polymeric matrix, and grow attached to a biotic or abiotic surface [26]. Biofilms often act as reservoirs of pathogenic microorganisms. The biofilm matrix protects the enclosed microorganisms by (i) increased access to nutrients (ii) reduction or delay in the penetration of antimicrobials and toxins (iii) continuance of extracellular enzyme activities and (iv) shelter from predation [26]. Formation of biofilm on or within indwelling medical devices poses a critical problem for medical care. The inherent resistance of biofilms has prompted research in the development of antiadhesive biological agents from BS to disrupt biofilms. Thus, the current research depicts the evidences in preventing the colonization of biofilm on PDMS based implant materials. Therefore, in this study, we explored the BS from L. acidophilus NCIM 2903 and structurally characterized for antibiofilm properties using various model organisms.

Methods

Strains and standard culture conditions

L. acidophilus NCIM 2903 was procured from the National Collection of Industrial Microorganisms (NCIM), National Chemical Laboratory (NCL), Pune, Maharashtra, India. For antibacterial and antiadhesive assays, Escherichia coli NCIM 2065, Staphylococcus aureus NCIM 2079, Proteus vulgaris NCIM 2027 cultures were all obtained from NCIM, NCL, Pune, India. Other cultures viz., Bacillus subtilis MTCC 2423, Pseudomonas putida MTCC 2467 and P. aeruginosa MTCC 2297 were obtained from Microbial Type Culture Collection - MTCC, Chandigarh, India. NCIM 2903 was grown and maintained in the laboratory on DeMan, Rogosa and Sharpe (MRS) (Himedia) agar [27]. The strain NCIM 2903 was previously isolated from curd sample. The standard temperature suggested for growth of this organism is 37 °C on MRS medium. Composition of MRS medium is as follows - Proteose peptone 10.000, Beef extract 10.000, Yeast extract 5.000, Dextrose 20.000, Polysorbate 80 1.000, Ammonium citrate 2.000, Sodium acetate 5.000, Magnesium sulphate 0.100, Manganese sulphate 0.050, Dipotassium phosphate 2.000 (g/L) final pH 6.5 ± 0.2. All other cultures were also grown and maintained in nutrient broth as per supplier’s instructions.

Assessment of biosurfactant biosynthesis

The BS production was assayed by different screening methods, since no single method is sufficiently accurate to assess the BS biosynthesis. The methods used in the study are as follows: Drop collapse test (DCT), Hemolytic Activity (HA), Emulsification Index, (EI), Oil Spread Method (OSM), Blue Agar Plate method (BAP), Tilted Glass Slide Test (TGST). All methods were carried out as described from our previous work [28]. Apart from these all aforementioned methods, we also assessed the BS biosynthesis by measuring the surface tension (SFT) of by a pendant drop technique using Optical Contact Angle Goniometer (OCA 15+, DataPhysics Instruments GmbH, Germany). In this method, the equilibrium shape of the pendent drop in the gravitational force was captured using charge-coupled device (CCD) camera and analyzed in real time using SCA 20 software. The axisymmetric pendant drop shape analysis was carried out by using Laplace-Young’s equation for determining the SFT values [29, 30].

Biosurfactant production

For production of BS three different media were used, viz., (i) Fermentation medium (FM) (designed by us -composition g/L-Peptone: 10.000, Beef extract: 10.000, Yeast extract: 10.000, Tri sodium citrate: 5.000 at pH 6.5, (ii) MRS with Tween 80 (MRS-T) (0.1%), (iii) MRS without Tween 80. The media were examined for better production of BS and the examination for the same was done by measuring the SFT by pendant drop method at different time intervals. Further, FM medium was selected for the BS production throughout the research. A seed culture was prepared by transferring a single colony of L. acidophilus into 10 ml of fermentation medium (FM) and incubated it overnight at 30 °C under shaking conditions (170 rpm). For BS production, a 5% (V/V) seed culture was transferred into sterile 150 ml of FM in 1 L Erlenmeyer flask and incubated at 170 rpm and 30 °C up to 120 h. The BS biosynthesis was monitored after every 12 h. The biomass during the BS biosynthesis was determined as dry cell weight. For this purpose, a volume of 10 ml of FM was filtered through sterile filter paper (0.22 μm Millipore, Bangalore, India) and dried at 105 °C for 24 h and reweighed. Dry bacterial biomass was repeatedly weighed till constant weight was achieved.

Extraction of biosurfactant

For the extraction of cell CABS, cells were harvested by centrifugation (15,000 g, 20 min, 4 °C), washed in demineralized water and resuspended in 50 mL of phosphate buffered saline (PBS, 0.01 M KH2PO4/K2HPO4 and 0.15 M NaCl with pH adjusted to 7.0). Cells were gently resuspended at room temperature (RT) of 30 °C for 2 h to release BS associated with bacterial cell followed by centrifugation (15,000 g, 20 min, 4 °C). Remaining supernatant was filtered through filter (0.22 mm pore size, Millipore, Bangalore, India). The supernatant was dialyzed against demineralized water with dialysis membranes having molecular mass cut-off 12,000 Da (Sigma-Aldrich, USA) and further freeze-dried and stored at − 20 °C until further use.

Physical characterization of biosurfactant

It was determined by measuring the physical properties of the BS viz., ionic character (IC), relative emulsion volume (REV), temperature and pH stability. Importantly, other physical properties, SFT, critical micelle concentration (CMC) and also interfacial tension (IFT) was determined by a pendant drop technique using OCA Goniometer. The spreading capacity of BS was determined by measuring the contact angle (CA) of CMC solution of BS in a sessile drop technique. Synthetic surfactants (their CMC concentrations) viz., cetyl trimethyl ammonium bromide (CTAB), Aerosol-OT/sodium bis (2-ethylhexyl) sulfosuccinate (AOT), Sodium dodecyl sulphate (SDS), Tween 80 were included as reference surfactants for testing all physical properties of BS.

Critical micelle concentration (CMC) of biosurfactant

The CMC value of BS was determined by measuring the SFT of BS in PBS solution (pH 7.0). The CMC is the point where an increase in the concentration of BS does not have any further reduction in SFT. In this technique, drop of liquid of different concentrations of BS, ranging from 1 to 60 mg/ml prepared in PBS was allowed to hang from the end of a capillary and the asymmetric shape of a pendant drop was determined by using Laplace-Young equation [29, 30] for measuring the value of SFT. The measurements of CA were made by using OCA Goniometer. The CMC was determined by plotting the SFT as a function of the logarithm of BS concentration and is represented as the point at which the baseline of minimal SFT intersects the slope where SFT shows a linear decline.

Determination of hydrocarbon-water interfacial tension (IFT)

The IFT of the BS sample was also determined. A glass cuvette (l = 35 mm, b = 22 mm and, h = 25 mm) was cleaned in ultrasonic bath using aqueous detergent solution, followed by washing with distilled water, acetone, ethanol and finally isopropyl alcohol. After cleaning and drying procedures, the glass cubical was filled with 15 ml of kerosene (purchased from local market) and placed on the platform of Goniometer. Further, a syringe was filled with reference and BS solutions (at CMC concentration) and the tip of the syringe was dipped completely in kerosene filled in the glass cubical. Subsequently a pendent drop of BS solution in kerosene was formed, and measurements for IFT were taken between two immiscible liquids as discussed earlier.

Determination of spreading capacity of biosurfactant

The spreading ability or wettability of BS was determined by measuring the contact angle (CA) on various surfaces by using sessile drop techniques A drop of 25 μl of sample was placed and measurements were taken on five different surfaces viz., Teflon polymer (Polytetrafluoroethelene-PTFE) tape (highly hydrophobic), Polydimethyl siloxane (PDMS) (highly hydrophobic), polystyrene, overhead projector (OHP) transparency sheet (Intermediate hydrophilic-hydrophobic) and glass slide (highly hydrophilic) surfaces.

Analysis in change of the hydrophobicity of PDMS surface through coating of biosurfactant

The CA measurements were taken on both PDMS surface (Control) and PDMS coated with BS (Test). A thin layer CABS (CMC solution 23.6 mg/ml) was coated on PDMS surface by immersing the PDMS sections (l = 2.0 cm, b = 2.0 cm, h = 0.1 cm) for overnight and dried then further in dust free airflow. After complete drying procedures, the CA of a drop of 25 μl water, PBS (@pH 7) and various synthetic surfactants (as mentioned earlier) were also measured to analyse any change in the hydrophobicity of PDMS surface before and after coating of CABS.

Determination of temperature and pH stability

The stability of BS was determined at different pH and temperatures by measuring SFT values. Buffers in the range of 2.0, 4.0 …12.0) were used to examine the stability of BS. Similarly, to evaluate stability at different temperatures, the freeze-dried CABS was dissolved in PBS (pH 7.0) and incubated at 28 °C, 37 °C and 60 °C for 48 h and SFT for each sample was determined before and after incubation procedures. In addition, the activity of BS was also checked before and after autoclaving.

Relative emulsion volume of biosurfactant and its stability

The emulsion-stabilizing capacity of the BS was tested on five different hydrocarbons (kerosene, n-decane, n-hexane, xylene, benzene and n-heptane). In this technique, 2 ml of BS (CMC solution) and 2 ml each of hydrocarbons were taken in a graduating test tube, shaken vigorously for 2 min, and left stand still for 24 h. The relative emulsion volume (EV in %) and emulsion stability (ES in %) were calculated as per the method described by Das et al. [31].

Thin layer chromatography (TLC)

Briefly, 10 μl aliquot of BS sample was concentrated on a pre-coated silica gel plate –TLC (Merck, KGaA, Darmstadt, Germany), and run in following system: chloroform: methanol: acetic acid (65: 25: 2); butanol: ethanol: water (5: 3: 2); chloroform: methanol: water (65: 15: 2); butanol: acetic acid: water (12: 3: 5) and developed respectively with anisaldehyde, diphenylamine, iodine and ninhydrin reagents for the respective determination of glycolipid, sugar, lipids and amino acid moieties of BS.

Fourier trans-form infrared spectroscopy (FT-IR) of functional groups

The FTIR facilitates identification of types of chemical bonds i.e. functional groups present in BS. One milligram of BS powder was grounded with 100 mg of potassium bromide (KBr) and translucent pellet was analyzed using FTIR device (Jasco FT/IR-6100, Japan). The spectrum in the range of 400–4000 cm− 1 at a resolution of 4 cm− 1 was obtained and analysed.

Determination of molecular weight of protein by sodium dodecyl sulphate polyacrylamine gel electrophoresis (SDS-PAGE)

Gel electrophoresis of BS (50 μg) was carried out using 12% (w/v) resolving gel and 4% stacking gel and run at a constant current (25 mA) till the dye front reaches the bottom. The gels were developed by staining with Coomassie blue R250. The molecular weight of protein was determined by comparing it with the protein ladder. The protein ladder (Bio-Rad, US) used in the study is as follows: (weights in kDa) β-Galactosidase (116.2); Phosphocyclase –B (97.4); Serum albumin (66.2); Ovalbovine (45); Carbonic unhydrase (31); Trypsin inhibitor (21.5); Lysozyme (14.4).

Determination of ionic character

Agar double diffusion technique was used to determine the ionic charge of BS [32]. For this study, two regularly-spaced rows of wells were made in an agar of low hardness (1% agar w/v). The lower row of wells was filled with the BS solution (at CMC concentration) and the upper rows of well were filled with reference surfactants (SDS: 20 mM and AOT: 20 mM, CTAB: 20 mM and Barium chloride: 20 mM and Triton X – 100: 0.9 mM and Tween 80: 0.012 mM each) of different ionic charges, and monitored for the presence of precipitation line over a period of 48 h at RT.

Antibacterial and antiadhesion assay

Antibacterial and antiadhesion assays of BS were performed by using six bacterial cultures viz., E. coli, S. aureus, P. vulgaris, B. subtilis, P. putida, and P. aeruginosa. Micro-dilution technique in 96-well flat-bottom plastic tissue culture plates (Tarsons, India) was carried out to determine the antibacterial and antiadhesive activity of BS against selected bacterial cultures [17].

Preparation of polydimethylsiloxane (PDMS) based contact lens surface

PDMS based contact lenses were prepared by mixing 184 silicone elastomeric base with a curing agent (10:1) (Elastomer solution kit: 184 Sylgard, Dow Corning, Rheingaustrasse, Wiesbaden, Germany) followed by gentle stirring to obtain a uniform and clear solution. The clear solution of PDMS was poured in sterile disposable petri dish. It was allowed to solidify at temperature of 80–100 °C for 6 h in vacuum oven at a pressure of 100 Pa (10− 3 to 1 Torr). Circular PDMS discs (diameter 0.8 cm and thickness of 0.1 cm) were cut and used for evaluating adhesion inhibition activity of BS against pathogenic bacteria.

Inhibition of bacterial pathogen adhesion on PDMS based surfaces treated with biosurfactant

Two sets of sterile PDMS discs were used to demonstrate the antiadhesion and antibiofilm effect of formulation. One set without any BS coating was considered as control. The other set coated with BS (CMC solution in buffer) was considered as test. For coating, all discs were immersed in sterile nutrient culture medium and then inoculated with test culture and incubated at 37 °C. Further discs were removed and rinsed with sterile distilled water to remove un-adhered microorganisms. Further whole discs were observed under light microscope (10 X), and scanning electron microscopic (SEM - JOEL, JSM-6360A) images were also taken.

Statistical analysis

All experiments were performed in triplicates. The standard deviation of the data was analyzed using the software ‘GraphPad Prism version 7.00 (GraphPad Software, San Diego, CA)’ and is presented in the form of Figs. P values < 0.05 were considered significant. Error bars are represented as as ± SD.

Results

Screening for biosurfactant synthesis

The results of the screening assays used to confirm BS production including SFT, CA measurements were positive.

Medium for biosurfactant synthesis

BS produced by L. acidophilus NCIM 2903 was determined by measuring the SFT of cell free broth and in case of cell bound BS extracted in PBS. In this paper, our work is solely focused on CABS. L. acidophilus did not synthesized BS in MRS and MRS-T evident from SFT values. Both MRS and MRS-T supported the growth of L. acidophilus culture; however, no drastic change in pH was observed (Refer Fig. 1). Instead it synthesized BS only in FM with an amount of 175 mg/L. The gradual decrease (55 to 28 mN/m) in SFT of FM was observed as the culture continued to grow up to 72 h and further incubation up to 120 h resulted in increase in SFT values (28 to 36 mN/m). The growth of culture (log to stationary phase) was associated with the change in pH (6.5 to 8.7) (Fig. 2). Therefore, all subsequent studies were performed in FM medium.

Fig. 1
figure 1

Analysis of surface tension, biomass and pH profile of L. acidophilus NCIM 2903 grown in MRS, MRS-Tween

Full size image
Fig. 2
figure 2

Analysis of surface tension and biomass of L. acidophilus NCIM 2903 grown in fermentation medium for production of biosurfactant

Full size image

Isolation of biosurfactant

The present study is pertinent to BS associated with cells (CABS). The synthesis of BS (evident from SFT values) occurred in FM. At 72 h, the value of SFT reduced from an initial 55 to 28 mN/m. However, after 72 h, the synthesis of BS was decreased (Fig. 2) and was evident from the increased values of SFT 28 to 36 mN/m. During the incubation time, the biomass showed a similar trend, it increased until 72 h and then gradually decreased. The pH of the FM during this period also increased from 6.5 to 8.8.

Physical properties

Analysis of physical properties of freeze-dried CABS proved it as an effective BS.

Evaluation of surface tension and critical micelle concentration (CMC)

The CMC was found out to be 23.6 mg/mL, indicating the concentration of BS after which there is no further reduction in SFT values. CABS could reduce the SFT of the PBS solution from 71 to 26 mN/m (Refer Fig. 3). In addition, the IFT measurements of BS against different hydrocarbons also proved its surfactant property.

Fig. 3
figure 3

a Variation in surface tension and b semi-logarithmic reflection of critical micelle concentration (CMC) value from SFT (mN/m) versus BS concentration for CABS extracted from L. acidophilus NCIM 2903

Full size image

Hydrocarbon-water interfacial tension (IFT) and spreading capacity- contact angle (CA)

BS showed a reduction in the IFT values with different immiscible liquids where highest reduction being with kerosene interphase, from 27 to 1.5 mN/m. Similarly, the CA measurements of BS on different surfaces are as shown in Fig. 4. The highest reduction in CA was observed on polystyrene surface (from 96 to 36 °) followed by Teflon (from 112 to 65°). On other hydrophobic surface like PDMS the CA was decreased (from 111 to 59°). A marginal reduction in CA (from 35 to 26°) was observed on glass (highly hydrophilic) surface. The results of CA measurements confirmed the good spreading ability of BS which was evident from Fig. 4. When PDMS surfaces were coated with CABS, there was a slight reduction in CA of all samples (P < 0.05) (Refer Fig. 5).

Fig. 4
figure 4

Measurement of Contact angle (CA) for CABS obtained from L. acidophilus NCIM 2903 on various surfaces

Full size image
Fig. 5
figure 5

Measurement of Contact angle (CA) on PDMS surface with and without CABS coating (CMC solution 23.6 mg/ml). Data was analysed by paired Student’s t-test

Full size image

Temperature and pH stability

The values of SFT were stable (26–27 mN/m) and have not changed over a broad range of pH and temperature. The SFT remained relatively stable over a pH range from 6 to 10, and temperature range of 4 °C to 60 °C for 120 h. The SFT values at pH and temperature outside these range increased slightly (31 to 35 mN/m).

Relative emulsion capacity and its stability

The EC and ES activity of BS against different water immiscible hydrocarbons revealed a relative EV between 25 and 65% and a relative ES between 45 and 87%. The highest EV (65%) and ES (87%) were detected against n-decane, followed by xylene, (46%) and (87%).

Thin layer chromatography

The comparison of the BS with reference compounds on TLC showed the presence of sugar (Fig. 6a), lipid (Fig. 6b and c) and amino acids (Fig. 6d). The presence single spot with Rf value of 0.67 confirmed the presence of sugar. Two difference solvent systems used for detection of lipids also indicated presence of yellow brown spots (Rf value 0.54, 0.42 and 0.37, 0.47, 0.16). TLC used for detection of amino acids indicated presence of five pink coloured spots.

Fig. 6
figure 6

a: Sugar; b, c: Lipid; d: amino acids of CABS obtained from L. acidophilus NCIM 2903 which is run in different solvent systems and detected with respective post-chromogenic developing agents. Arrows indicates the presence of various components of CABS detected on TLC sheets. CABS: cell associated biosurfactant; MC: medium control; RHL: Rhamnolipid

Full size image

Fourier trans-form infrared spectroscopy (FT-IR)

The molecular composition of BS was further studied by FTIR spectroscopy (Fig. 7). The FTIR shows the stretch between 3400 to 2400 cm− 1 confirming the presence of –OH groups while the small peak at 2851 cm− 1 corresponds to the existence of C-H bond. Peak at 1666 cm− 1 determines C=O stretching while peak at 1550 cm− 1 determines presence of -NH stretching, both confirming the presence of proteins. The peak at 1069 indicates the presence of C–O stretching in sugars. Peak at 978 cm− 1 reveals the presence of mono-substituted alkenes. The FTIR spectrum obtained in present study suggests the glycolipoprotein type of BS.

Fig. 7
figure 7

FTIR spectrum of the freeze-dried CABS obtained from L. acidophilus NCIM 2903

Full size image

Sodium dodecyl sulphate polyacrylamine gel electrophoresis (SDS-PAGE)

The SDS-PAGE of the BS illustrated multiple bands in a molecular range of 14.4 to 60 kDa, with prominent bands of 45 kDa. It might be because of contamination of peptides which could not be removed completely during the purification process. Please note that the BS reported in this study is cell associated (proteinaceous) and not cell free (not released in the medium), therefore higher is the possibility of cell associated BS got contaminated with other proteins.

Ionic character

Ionic characteristics as revealed by agar double diffusion tests (which are based on the passive diffusion of two compounds possessing charges of the similar or opposite types in a weakly-concentrated gel) displayed precipitation lines between the BS and cationic compounds (CTAB); such precipitation line was not observed between the BS and anionic compounds (SDS) (Fig. 8).

Fig. 8
figure 8

Double diffusion on agar of a cationic (positively charged) cetyl trimethyl ammonium bromide (CTAB) against b an anionic CABS produced by L. acidophilus NCIM 2903; Arrow indicates line of precipitation formed between cationic and anionic pair

Full size image

Antibacterial and antiadhesion activity

The BS demonstrated antibacterial and antiadhesive properties. BS at a concentration of 25 mg/mL inhibited the growth of E. coli and P. vulgaris by 34 and 33% respectively, followed by B. subtilis (26%) and P. putida (14%) (Fig. 9). Similarly, the BS displayed highest adhesion inhibition of 81 and 79% against S. aureus and B. subtilis respectively. The adhesion inhibition for remaining four bacterial cultures was found to be in the range of 59 to 65% respectively (Fig. 10).

Fig. 9
figure 9

Antibacterial activity of CABS (25 mg/ml) against bacterial pathogens

Full size image
Fig. 10
figure 10

Antiadhesion activity of CABS (25 mg/ml) against bacterial pathogens on polystyrene surface

Full size image

Antibiofilm and antiadhesion of biosurfactant on PDMS discs

Microscopic images (Refer Fig. 11) of biofilm forming bacteria P. vulgaris and S. aureus on PDMS based contact lenses surface illustrates the antiadhesion property of CABS. SEM studies also demonstrated the antibiofilm and antiadhesive potentials of BS against P. vulgaris and B. subtilis on PDMS discs (Fig. 12). A massive biofilm was visualized on the PDMS surface without any BS coating, whereas in the presence of the BS coating, a sparse/negligible biofilms were observed. This observation illustrated the adhesion inhibition and antibiofilm potential of the BS.

Fig. 11
figure 11

Microscopic images (10X) of biofilm forming bacteria P. vulgaris (Control: A) and S. aureus (Control: B) on polydimethylsiloxane (PDMS) surface. Impeding effect of L. acidophilus NCIM 2903 derived CABS (CMC solution 23.6 mg/ml) on bacterial biofilms of P. vulgaris (Test: a) and S. aureus (Test: b)

Full size image
Fig. 12
figure 12

SEM images of biofilm formed by B. subtilis (Control: A) and P. vulgaris (Control: B) on polydimethylsiloxane (PDMS) based medical implant surface. Impeding effect of L. acidophilus NCIM 2903 derived CABS (CMC solution 23.6 mg/ml) on B. subtilis (Test: a) and P. vulgaris (Test: b) biofilms

Full size image

Discussion

The ever increasing resistance by pathogenic microbes to current therapeutics agents has drawn attention of researchers towards BSs as the new source of therapeutic agents to control and eradicate such pathogenic microorganisms. BSs have qualified as therapeutics agents due to their ability to (i) disrupt membranes leading to cell lysis and metabolite leakage (ii) disrupt protein conformations of important membrane functions such as transport and energy generation [33] (iii) form a film that changes wettability and surface energy of the original surface affecting the adhesion properties of micro-organisms [34]. Therefore, in present study we explored antibacterial, antibiofilm and antiadhesion properties of the BSs derived from L. acidophilus strain. Servin et al. [11] reviewed antagonistic properties of Lactobacilli against microbial pathogens in the gastrointestinal tract. Sharma and Saharan [24] showed antiadhesive and antibacterial potential of BS obtained from L. helveticus MRTL91 that was isolated from Chhurpi cheese, against various pathogens of gastrointestinal tract such as E. coli, S. typhi. Lactobacillus spp. possesses high capability to inhibit the initial adhesion of uropathogens.

Most of the studies have reported the use of MRS medium for the synthesis of BSs from Lactobacilli spp. [35, 36]. However, in the present study, MRS or its modified media didn’t support the synthesis of BSs in Lactobacillus spp. Therefore, we designed a new medium (FM) to support the synthesis of BSs. The decrease in SFT values of FM medium inoculated with Lactobacillus culture (test) was compared with control medium (without inoculation). Interestingly, the synthesis of BSs was accompanied by change in the pH of the FM medium from neutral to alkaline condition, which is rather contrary with available reports [20, 37] where respective researchers used deproteinized whey (anaerobic conditions) and MRS-Lac medium (aerobic condition). The production medium used by Sharma et al. [20] contained deproteinized whey and yeast extract (10 g/L) with controlled pH at 6.2 and flushed the BS production medium with N2 gas to replace dissolved oxygen. Gudiña et al. [37] used MRS-Lac medium with pH adjusted to 6.2 with incubation of bacterium under aerobic conditions. Both reports [20, 37] have shown a decrease in the pH (neutral to acidic) of the fermentation media during the fermentation process of BSs by Lactobacillus genus which might be due to production of lactic acid and other metabolite. However, in present study, an increase in the pH (neutral to alkaline) (Fig. 2) of the FM medium maybe due to accumulations of alkaline byproducts in the culture medium. We have used proteinaceous substrates (yeast extract, beef extract, peptone) which contains several amino acids, peptides, carbohydrates and water soluble vitamins. Proteolysis of such compounds results in the formation of alkaline N-compounds which leads to an overall increase in the pH (alkaline) of FM. Our observations on the onset and maximal level of BSs were contrary to available reports. Reports on the synthesis of BSs suggest the onset and maximal level of BSs in late logarithmic to stationary phases of growth [1, 15, 20, 38]. In our studies we found the synthesis of BSs was growth dependent, and reached maximal at logarithmic growth phase, as witnessed by an increase in the biomass of Lactobacillus spp. and change in SFT values. This could have happened due the medium used for the growth of Lactobacillus spp. It is likely that FM medium induced the BSs production in the initial logarithmic phase of growth, and continued an increased synthesis of BSs as growth progressed from mid to late logarithmic phase. The change in media composition does affect the production of BS [36, 37]. In fact, the BS production by microorganism is growth associated [37].

It is often important to know the molecular composition of BSs to explore their potential applications in various fields. Therefore, the molecular compositions of the BSs synthesized by Lactobacillus were undertaken by performing TLC followed by post chromatographic detection by staining with different chromogenic compounds. The chromatograms of the BSs resemble with the TLC pattern of BSs used as reference, and showed the presence of lipid, amino acids and sugar fractions, revealing glycolipoprotein type of BSs. The BSs with glycolipopeptide nature is a rare type of example, and most of the studies reported the BSs as either glycolipid [19, 20] or glycoprotein [15, 16, 38]. There are three reports viz., Moldes et al. [18], Vecino et al. [39] and Morais et al. [40] which showed the molecular compositions of BSs as glycolipopeptide. In addition to TLC technique, the molecular composition of the BSs was also supported with FTIR spectroscopy. The FTIR is the most useful technique to investigate chemical bonds (functional groups) present in the unknown compound, and thus determines its chemical nature. The FTIR shows the stretch between 3400 to 2400 cm,− 1 confirming the presence of –OH groups [19] whereas the small peak at 2851 cm− 1 corresponding to the existence of C-H bond. Presence of proteins and sugar is comparable with previous researches [18, 19]. In addition, a report highlighting the structure of BS from L. acidophilus species, Tahmourespour et al. [41], showed proteinaceous type of structure of BS from L. acidophilus DSM 20079, where the peak at 1′653 cm − 1 (AmI band: CAO stretching in proteins) and a peak at 1′480 cm − 1 (AmII band: NOH bending in proteins). The BS showed comparatively higher amounts of protein and less polysaccharides in the structure. Determination of accurate molecular structure is extremely challenging [36] and is beyond the capacity of the current study. With the help of TLC and SDS-PAGE, we confirm the presence of protein in the BS obtained from L. acidophilus. The FTIR spectrum obtained in our study is comparable with FTIR spectrum of BSs obtained from L. pentosus [18, 39], suggesting glycolipoprotein nature of BSs. At commercial scale low yield of BS is major concern where high cost inputs are mandatory. Therefore, usage of renewable substrates like dairy industry, agro-industrial waste, coffee processing residues, animal fat waste, fruit processing industry, food processing industry has been recommended by several researchers [36]. L. agilis CCUG31450 produces 84 mg/L CABS in MRS medium. Whereas usage of cheese whey results increase in CABS up to 960 mg/L [16]. We are reporting comparatively lower yield (175 mg/L) from the strain used by us in the current study. Lactic acid bacteria (LAB) are mainly known for production of cell associated type BS. However, there are few reports suggesting production of cell free type BS. Both type of BS (cell free and cell associated or bound) can be produced simultaneously. It is important to note that the production is in very small quantities. The amount of CABS produced by LAB has been reported ranging between 20 to 100 mg/L [16].

Knowledge of various physical properties of BSs such as SFT, IFT, CMC, CA, EA and ES presents number of opportunities to explore them for undeniable applications proving the efficiency of BS. Unlike the most explored method (DuNouy Ring Method- to determine the efficiency of BS), we used a pendant drop technique to determine the profile of the drop of BS solution suspended in another liquid at equilibrium (due to the balance between gravity and surface force). A measure of a decrease in the IFT value between liquid and kerosene interphase by BS is an indication of the effectiveness of BS, which can be explored further to remediate oil spills in oceans and petroleum contaminations in soils. The CA determination between BS and surfaces is an important to determine the wettability. The CMC determination is important because it represent the concentration of BSs at which no further reduction in the SFT value of BSs solution occurs despite an increase in the concentration of BSs. Therefore, lower the CMC value, more efficient the BSs. In the present study, the CMC value of BS was quite close to the CMC of SDS, indicating an efficient SFT reducing ability of BS derived from Lactobacillus. Most of the literature on SFT values for BS produced by Lactobacilli species are in the range of 41 to 46 mN/m with varied CMC values [15, 16, 21]. The CA determination is important since it defines the wetting characteristics of BS; the latter is an important for determining the degree of adhesion or affinity of a liquid for a solid surface. The wetting properties of BS are important as it dictates the adhesion of pathogens to biomaterials implants in human body. The CA measurements for BS from Lactobacillus spp. have not been frequently reported in literature. The ability of BS to reduce the CA on hydrophobic surfaces has been successfully utilized to interfere the initial adhesion of uropathogenic bacteria and yeasts on silicone based surfaces [42]. This has been demonstrated effectively on PDMS based surfaces in our present studies. Similarly, BS derived from Lactobacilli showed some good emulsification abilities as well as stabilities which is in an agreement with Portilla-Rivera et al. [43] for emulsions of octane/water stabilized by BS derived from L. pentosus. The agar double diffusion tests performed to know the ionic characteristics of BS revealed an anionic nature of BS derived from Lactobacillus. The test is actually an indication of the passive diffusion of two compounds having same or opposite types of charges in a weakly-concentrated gel. Anionic nature of BS (in present study) has also been reported by Sharma et al. [20] for BS derived from L. helveticus strain MRTL91.

After studying the physical, molecular, properties of BS, we decided to investigate the antibacterial, antiadhesive and antibiofilm properties. The study of antiadhesive and antibiofilm activities of BS become essential due the reports of the failure of bio-implants due to colonization of biofilm forming organisms, and an increased resistance of such microorganisms (due to biofilm) to the treatment of antibiotics. The improved antiadhesive and antibiofilm activities of BS from Lactobacillus could be due the molecular and physiological characteristics of biofilm. Hydrophobicity and surface charge of a bacterial cell are important factors that govern the non-specific attachment of the bacteria to a surface. It is well known that most of microorganisms possess negative charges; therefore, the antiadhesion property shown by BS in present study could be due to an anionic nature of BS, which could have repelled the microbial adherence to the surfaces. The physical forces responsible for bacterial adhesion to surfaces include steric interactions, van der Waals forces and electrostatic (double layer) interaction. Also alteration/ fluctuation in the microenvironment make it difficult for bacterial cells to adapt easily. Gram negative bacteria tend to adhere to moderately hydrophobic surfaces owing to their hydrophobic LPS (lipopolysaccharide) layer [44]. In addition, the roughness of the surface aids in adherence of bacteria. Coating the PDMS surface with CABS reduces the surface roughness hindering bacterial adhesion to the surface. Another reason for such antiadhesive property of BS could be due the wetting properties of BS (small CA) which could have altered the hydrophobicity, and thus prevented the initial attachment of microorganisms to surface. The CA of distilled water was found to be reduced slightly on the PDMS surface which was coated with BS. This reduction might be due to the presence of protein and sugar moieties and their interaction with water on the BS coated surface. Also, the analysis of reduction in bacterial adhesion on BS coated surface might be due to the alteration of surface properties of PDMS surface, however do not allow adherence of organisms to the surfaces of medical implants which might have altered the bacterial adhesion at the molecular level. The antibiofilm activities could be explained due to the ability of BS to reduce the SFT between biofilm and substratum on which biofilm forms, thus, dispersing the biofilm from substratum. Secondly, antimicrobial property of BS could also be the reason for the antibiofilm activity of BS. Present research reports antibiofilm and antiadhesive properties of Lactobacillus derived BS are in agreement with Gudiña et al. [16, 17, 45]. BS produced by other Lactobacillus spp. like L. jensenii and L. rhamnosus do exhibit antimicrobial, antibiofilm as well as antiadhesive properties against multidrug resistant pathogens [46, 47]. Our observation is comparable with Dusane et al. [48] who revealed that BS from marine bacterium S. marcescens exhibits antimicrobial activity against C. albicans, P. aeruginosa and B. pumilus. Similar studies carried out by Velraeds et al. [49] showed inhibitory effect of BS produced by Lactobacillus spp. on E. faecalis biofilms on glass surfaces. We investigated antibiofilm effect of BS on PDMS based surfaces where biofilms P. vulgaris, S. aureus and B. subtilis were nearly inhibited. Previous studies demonstrated by Mireles et al. [50] indicated the inhibition of biofilm through surfactin on vinyl urethral catheters. Our study demonstrates good antiadhesion abilities as compared with antibacterial properties which is more noteworthy. Many researchers have recommended a concentration of CABS ranging between 25 and 50 mg/ml [36]. Recent studies [51] demonstrates that Lactobacillus spp. derived BS exhibiting antioxidant and antiproliferative properties against biofilm producers indicating the promiscuous applications in prevention of oral diseases. BS produced by Lactobacillus spp. have offered its applications in cosmetic formulations and medicine [52, 53]. Thus Lactobacillus is proving to be exceptionally promising candidate for the designing of newer BS based products. The proposed fact of our studies can be supported by Brzozowski, et al. [21] where BS is associated with an inhibition of adhesion of pathogens where the adhesion mechanisms is crucial than direct antimicrobial activity. Antiadhesive potential of L. acidophilus BS can be utilized against used against one of the nosocomial infectious pathogen like S. marcescens. Infections from various microorganisms at vaginal, urinary and gastrointestinal tracts infections can be protected with the help of BS derived L. acidophilus [22]. We have obtained protein based BS and such compounds are highly helpful in preventing the adhesion of pathogens. Our opinion is in agreement with Velraeds et al. 1998 [42] who have demonstrated the effective role of surlactin (protein rich CABS) derived from L. acidophilus RC14 as antiadhesive against various uropathogenic bacteria to silicone rubber surfaces. One of the pathogens namely S. mutans associated with dental caries and biofilm formations are effectively inhibited by the CABS produced by L. acidophilus [41]. Finally, we conclude that powerful BS is derived from Lactobacillus having huge potential as antiadhesive agent which can be used for various surfaces of biomedical devices.

Conclusion

To the best of our knowledge, this is the first report extensively discussing the characterization of various physical properties of BS derived from Lactobacillus spp. and we are reporting the lowest surface tension value. We are also proposing a simple fermentation medium for BS production; where MRS medium was the routine practice. Our work demonstrated that BS from L. acidophilus exhibited antibiofilm and antiadhesive activities against biofilm producers on PDMS based medical implant surfaces.

Abbreviations

BS:

Biosurfactant

CA:

Contact angle

CABS:

Cell-associated-biosurfactant

CMC:

Critical micelle concentration

FTIR:

Flourier transform infrared spectroscopy

IFT:

Interfacial tension

PBS:

Phosphate buffer saline

PDMS:

Polydimethylsiloxane

SDS-PAGE:

Sodium Dodecyl Sulphate Polyacrylamine Gel Electrophoresis

SFT:

Surface tension

TLC:

Thin layered chromatography

References

  1. Sharma D, Saharan BS, Kapil S. Biosurfactants of lactic acid bacteria. In: Springer briefs in microbiology. New York, NY: Springer; 2016.

    Google Scholar 

  2. Fracchia L, Banat JJ, Cavallo M, Ceresa C, Banat IM. Potential therapeutic applications of microbial surface-active compounds. AMIS Bioeng. 2015;2:144–62. https://doi.org/10.3934/bioeng.2015.3.144.

    Article  CAS  Google Scholar 

  3. Shekhar S, Sundaramanickam A, Balasubramanian T. Biosurfactant producing microbes and their potential applications: a review. Cri Rev Environ Sci Technol. 2015;45:1522–54. https://doi.org/10.1080/10643389.2014.955631.

    Article  CAS  Google Scholar 

  4. Santos DKF, Rufino RD, Luna JM, Santos VA, Sarubbo LA. Biosurfactants: multifunctional biomolecules of the 21st century. Int J Mol Sci. 2016;17:401. https://doi.org/10.3390/ijms17030401.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  5. De S, Malik S, Ghosh A, Saha R, Saha B. A review on natural surfactants. RSC Adv. 2015;5:65757–67. https://doi.org/10.1039/C5RA11101C.

    Article  CAS  Google Scholar 

  6. Mulligan C. Recent advances in the environmental applications of biosurfactants. Current Opinion in Colloid Interface Sci. 2009;14:372–8. https://doi.org/10.1016/j.cocis.2009.06.005.

    Article  CAS  Google Scholar 

  7. Gudiña EJ, Rangarajan V, Sen R, Rodrigues LR. Potential therapeutic applications of biosurfactants. Trends in Pharmacological Sci. 2013;34:667–75. https://doi.org/10.1016/j.tips.2013.10.002.

    Article  CAS  Google Scholar 

  8. Mnif I, Ghribi D. Review Lipopeptides biosurfactants: mean classes and new insights for industrial, biomedical, and environmental applications. Biopolymers. 2015;104:129–47. https://doi.org/10.1002/bip.22630.

    Article  CAS  PubMed  Google Scholar 

  9. Berstad A, Raa J, Midtvedt T, Valeur J. Probiotic lactic acid bacteria – the fledgling cuckoos of the gut? Microb Ecol Health Dis. 2016;27(31557). https://doi.org/10.3402/mehd.v27.31557.

  10. Fariq A, Saeed A. Production and biomedical applications of probiotic biosurfactants. Curr Microbiol. 2016;72:489–95. https://doi.org/10.1007/s00284-015-0978-4.

    Article  CAS  PubMed  Google Scholar 

  11. Servin AL. Antagonistic activities of lactobacilli and Bifidobacteria against microbial pathogens. FEMS Microbiol Rev. 2004;28:405–40. https://doi.org/10.1016/j.femsre.2004.01.003.

    Article  CAS  PubMed  Google Scholar 

  12. Di Cerbo A, Palmieri B, Aponte M, Morales-Medina JC, Iannitti T. Mechanisms and therapeutic effectiveness of lactobacilli. J Clin Pathol. 2016;69:187–203. https://doi.org/10.1136/jclinpath-2015-202976.

    Article  PubMed  Google Scholar 

  13. Chan XY, Chang CY, Hong KW, Tee KK, Yin WF, Chan KG. Insights of biosurfactant producing Serratia marcescens strain W2.3 isolated from diseased tilapia fish: a draft genome analysis. Gut Pathogens. 2013;5:29–33. https://doi.org/10.1186/1757-4749-5-29.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  14. Singh PK, Schaefer AL, Parsek MR, Moninger TO, Welsh MJ, Greenberg EP. Quorum-sensing signals indicate that cystic fibrosis lungs are infected with bacterial biofilms. Nature. 2000;407:762–4. https://doi.org/10.1038/35037627.

    Article  CAS  PubMed  Google Scholar 

  15. Madhu AN, Prapulla SG. Evaluation and functional characterization of a biosurfactant produced by Lactobacillus plantarum CFR 2194. Appl Biochem Biotechnol. 2014;172:1777–89. https://doi.org/10.1007/s12010-013-0649-5.

    Article  CAS  PubMed  Google Scholar 

  16. Gudiña EJ, Fernandes EC, Teixeira JA, Rodrigues LR. Antimicrobial and anti-adhesive activities of cell-bound biosurfactant from Lactobacillus agilis CCUG31450. RSC Adv. 2015;5:909–60. https://doi.org/10.1039/C5RA11659G.

    Article  Google Scholar 

  17. Gudiña EJ, Teixeira JA, Rodrigues LR. Isolation and functional characterization of a biosurfactant produced by Lactobacillus paracasei. Colloids Surf B: Biointerfaces. 2010;76:298–304. https://doi.org/10.1016/j.colsurfb.2009.11.008.

    Article  CAS  PubMed  Google Scholar 

  18. Moldes AB, Paradelo R, Vecino X, Cruz JM, Gudiña E, Rodrigues L, Teixeira JA, et al. Partial characterization of biosurfactant from Lactobacillus pentosus and comparison with sodium dodecyl sulphate for the bioremediation of hydrocarbon contaminated soil. Biomed Res Int. 2013;961842:6. https://doi.org/10.1155/2013/961842.

    Article  CAS  Google Scholar 

  19. Sharma D, Singh Saharan B. Simultaneous production of biosurfactants and bacteriocins by probiotic Lactobacillus casei MRTL3. Inter J Microbiol. 2014;698713. https://doi.org/10.1155/2014/698713.

  20. Sharma D, Singh Saharan B, Chauhan N, Bansal A, Procha S. Production and structural characterization of Lactobacillus helveticus derived biosurfactant. The Scientific World J. 2014;493548(9). https://doi.org/10.1155/2014/493548.

  21. Brzozowski B, Bednarski W, Gołek P. The adhesive capability of two lactobacillus strains and physicochemical properties of their synthesized biosurfactants. Food Technol Biotechnol. 2011;49:177–86.

    CAS  Google Scholar 

  22. Shokouhfard M, Kermanshahi RK, Shahandashti RV, Feizabadi MM, Teimourian S. The inhibitory effect of a Lactobacillus acidophilus derived biosurfactant on biofilm producer Serratia marcescens. Iranian J Basic Medical Sci. 2015;18:1001–7.

    Google Scholar 

  23. Banat IM, Franzetti A, Gandolfi I, Bestetti G, Martinotti MG, Fracchia L, et al. Microbial biosurfactants production, applications and future potential. Appl Microbiol Biotechnol. 2010;87:427–44. https://doi.org/10.1007/s00253-010-2589-0.

    Article  CAS  PubMed  Google Scholar 

  24. Sharma D, Singh Saharan B. Functional characterization of biomedical potential of biosurfactant produced by Lactobacillus helveticus. Biotechnol Reports. 2016;11:27–35. https://doi.org/10.1016/j.btre.2016.05.001.

    Article  Google Scholar 

  25. Ciandrini E, Campana R, Casettari L, Perinelli DR, Fagioli L, Manti A, et al. Characterization of biosurfactants produced by Lactobacillus spp. and their activity against oral streptococci biofilm. Appl Microbiol Biotechnol. 2016;100:6767–77. https://doi.org/10.1007/s00253-016-7531-7.

    Article  CAS  PubMed  Google Scholar 

  26. Gupta P, Sarkar S, Das B, Bhattacharjee S, Tribedi P. Biofilm, pathogenesis and prevention--a journey to break the wall: a review. Arch Microbiol. 2016;198:1–15. https://doi.org/10.1007/s00203-015-1148-6.

    Article  CAS  PubMed  Google Scholar 

  27. De Man JC, Rogosa M, Sharpe ME. A medium for the cultivation of lactobacilli. J Appl Bacteriol. 1960;23:130–5. https://doi.org/10.1111/j.1365-2672.1960.tb00188.x.

    Article  Google Scholar 

  28. Satpute SK, Bhawsar BD, Dhakephalkar PK, Chopade BA. Assessment of different screening methods for selecting biosurfactant producing marine bacteria. Indian J Marine Sci. 2008;37:243–50 http://nopr.niscair.res.in/handle/123456789/2045.

  29. del Rio OI, Neumann AW. Axisymmetric drop shape analysis: computational methods for the measurement of interfacial properties from the shape and dimensions of pendant and sessile drops. J Colloid Interface Sci. 1997;196:136–47. https://doi.org/10.1006/jcis.1997.5214.

    Article  CAS  PubMed  Google Scholar 

  30. Sawane YB, Datar S, Ogale SB, Banpurkar AG. Hysteretic DC electrowetting by field-induced nano-structurations on polystyrene films. Soft Matter. 2015;11:2655–64. https://doi.org/10.1039/C5SM00007F.

    Article  CAS  PubMed  Google Scholar 

  31. Das M, Das SK, Mukherjee RK. Surface active properties of the culture filtrates of a Micrococcus species grown on n-alkanes and sugars. Bioresour Technol. 1998;63:231–5. https://doi.org/10.1016/S0960-8524(97)00133-8.

    Article  CAS  Google Scholar 

  32. Meylheuc T, Van Oss CJ, Bellon-Fontaine MN. Adsorption of biosurfactant on solid surfaces and consequences regarding the bioadhesion of Listeria monocytogenes LO28. J Appl Microbiol. 2001;91:822–32. https://doi.org/10.1046/j.1365-2672.2001.01455.x.

    Article  CAS  PubMed  Google Scholar 

  33. Sánchez M, Aranda FJ, Teruel JA, Espuny MJ, Marques A, Manresa A, et al. Permeabilization of biological and artificial membranes by a bacterial dirhamnolipid produced by Pseudomonas aeruginosa. J Colloid Interface Sci. 2010;341:240–7. https://doi.org/10.1016/j.jcis.2009.09.042.

    Article  CAS  PubMed  Google Scholar 

  34. Neu TR. Significance of bacterial surface-active compounds in interaction of bacteria with interfaces. Microbiological Rev. 1996;60:151–66.

    CAS  Google Scholar 

  35. Banat IM, Satpute SK, Cameotra SS, Patil R, Nyayanit NV. Cost effective technologies and renewable substrates for biosurfactants’ production. Frontiers in Microbiol. 2014;5(697). https://doi.org/10.3389/fmicb.2014.00697.

  36. Satpute SK, Kulkarni GR, Banpurkar AG, Banat IM, Mone NS, Patil RH, et al. Biosurfactant/s from lactobacilli species: properties, challenges and potential biomedical applications. J Basic Microbiol. 2016;56:1–19. https://doi.org/10.1002/jobm.201600143.

    Article  Google Scholar 

  37. Gudiña EJ, Teixeira JA, Rodrigues LR. Biosurfactant producing Lactobacilli: screening, production profiles, and effect of medium composition. Appl Environ Soil Sci. 2011;2012 54:9. https://doi.org/10.1155/2011/201254.

    Article  Google Scholar 

  38. Gołek P, Bednarski W, Brzozowski B, Dziuba B. The obtaining and properties of biosurfactants synthesized by bacteria of the genus Lactobacillus. Ann Microbiol. 2009;59:119–26. https://doi.org/10.1007/BF03175608.

    Article  Google Scholar 

  39. Vecino X, Barbosa-Pereira L, Devesa-Rey R, Jose MC, Moldes AB. Optimization of extraction conditions and fatty acid characterization of Lactobacillus pentosus cell-bound biosurfactant/bioemulsifier. J Sci Food Agric. 2015;95:313–20. https://doi.org/10.1002/jsfa.6720.

    Article  CAS  PubMed  Google Scholar 

  40. Morais IMC, Cordeiro AL, Teixeira G S, Domingues VS, Nardi R MD, Monteiro AS et al. Biological and physicochemical properties of biosurfactants produced by Lactobacillus jensenii P6A and Lactobacillus gasseri P65. Microb Cell Fact. (2017);16(1). https://doi.org/10.1186/s12934-017-0769-7.

  41. Tahmourespour A, Salehi R, Kasra Kermanshahi R. Lactobacillus acidophilus-derived biosurfactant effect on GTFB and GTFC expression level in Streptococcus mutans biofilm cells. Braz J Microbiol. 2011;42:330–9. https://doi.org/10.1590/S1517-83822011000100042.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  42. Velraeds MMC. Van De Belt-Gritter B, van der Mei HC, Reid G, Busscher HJ. Interference in initial adhesion of uropathogenic bacteria and yeasts to silicone rubber by a Lactobacillus acidophilus biosurfactant. J Med Microbiol. 1998;47:1081–5. https://doi.org/10.1099/00222615-47-12-1081.

    Article  CAS  PubMed  Google Scholar 

  43. Portilla-Rivera O, Torrado A, Dominguez JM, Moldes AB. Stability and emulsifying capacity of biosurfactants obtained from lignocellulosic sources using Lactobacillus pentosus. J Agric Food Chem. 2008;56:8074–80. https://doi.org/10.1021/jf801428x.

    Article  CAS  PubMed  Google Scholar 

  44. Ryu JH, Kim H, Frank JF, Beuchat LR. Attachment and biofilm formation on stainless steel by Escherichia coli O157:H7 as affected by curli production. Lett Appl Microbiol. 2004;39:359–62. https://doi.org/10.1111/j.1472-765X.2004.01591.x.

    Article  PubMed  Google Scholar 

  45. Gudiña EJ, Rocha V, Teixeira JA, Rodrigues LR. Antimicrobial and antiadhesive properties of a biosurfactant isolated from Lactobacillus paracasei ssp. paracasei A20. Lett Appl Microbiol. 2010;50:419–24. https://doi.org/10.1111/j.1472-765X.2010.02818.x.

    Article  CAS  PubMed  Google Scholar 

  46. Fracchia L, Cavallo M, Allegrone G, Martinotti MGA. Lactobacillus-derived biosurfactant inhibits biofilm formation of human pathogenic Candida albicans biofilm producers. In: Mendez-Vilas A, editor. Current research, technology and edition topics in applied microbiology microbial technology. Microbiology book series - number 2. Spain: Formatex; 2010. p. 827–37.

    Google Scholar 

  47. Sambanthamoorthy K, Feng X, Patel R, Patel S, Paranavitana C. Antimicrobial and antibiofilm potential of biosurfactants isolated from Lactobacilli against multi-drug-resistant pathogens. BMC Microbiol. 2014;14:197. https://doi.org/10.1186/1471-2180-14-197.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  48. Dusane DH, Pawar VS, Nancharaiah YN, Venugopalan VP, Ravi Kumar A, Zinjarde SS. Anti-biofilm potential of a glycolipid surfactant produced by a tropical marine strain of Serratia marcescens. Biofouling. 2011;27:645–54. https://doi.org/10.1080/08927014.2011.594883.

    Article  CAS  PubMed  Google Scholar 

  49. Velraeds M, Van der Mei H, Reid G, Busscher H. Inhibition of initial adhesion of uropathogenic Enterococcus faecalis by biosurfactants from Lactobacillus isolates. Appl Environl Microbiol. 1996;62:1958–63.

    CAS  Google Scholar 

  50. Mireles JR II, Toguchi A, Harshey RM. Salmonella enterica serovar typhimurium swarming mutants with altered biofilm forming abilities: surfactin inhibits biofilm formation. J Bacteriol. 2001;183:5848–54. https://doi.org/10.1128/JB.183.20.5848-5854.2001.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  51. Merghni M, Dallel I, Noumi E, Kadmi Y, Hentati H, Tobji S, et al. Antioxidant and antiproliferative potential of biosurfactants isolated from Lactobacillus casei and their anti-biofilm effect in oral Staphylococcus aureus strains. Microb Pathog. 2017;104:84–9. https://doi.org/10.1016/j.micpath.2017.01.017.

    Article  CAS  PubMed  Google Scholar 

  52. Ferreira A, Vecino X, Ferreira D, Cruz JM, Moldes AB, Rodrigues LR. Novel cosmetic formulations containing a biosurfactant from Lactobacillus paracasei. Colloids Surf B: Biointerfaces. 2017;155:522–9. https://doi.org/10.1016/j.colsurfb.2017.04.026.

    Article  CAS  PubMed  Google Scholar 

  53. Satpute S, Mone N, Das P, Banpurkar A, Banat I. Lactobacillus acidophilus derived biosurfactant as a biofilm inhibitor: a promising investigation using microfluidic approach. Appl Sci. 2018;8:1555. https://doi.org/10.3390/app8091555.

    Article  Google Scholar 

Download references

Acknowledgements

Dr. Surekha K. Satpute, expresses special thanks of gratitude to Department of Science and Technology (DST), Government of India, Ministry of Science and Technology under Woman Scientist Scheme (WOS-A) for financial support {SR/WOS-A/LS-1076/2014(G)} and Prof. Gauri R. Kulkarni, The Director, School of Basic Medical Sciences, Department of Physics, Savitribai Phule Pune University for providing the laboratory facilities to complete the research work.

Funding

SKS was supported by fellowship under Woman Scientist Scheme (WOS-A) {SR/WOS-A/LS-1076/2014(G)} to design the study, conduct the experiments, analysis, interpretation of data and writing the manuscript by Department of Science and Technology (DST), Government of India, Ministry of Science and Technology.

Availability of data and materials

The data used and analyzed during the present study are accessible from the corresponding author on request.

Author information

Authors and Affiliations

  1. Department of Microbiology, Savitribai Phule Pune University, Pune, Maharashtra, 411007, India

    Surekha K. Satpute, Nishigandha S. Mone & Parijat Das

  2. Department of Physics, Savitribai Phule Pune University, Pune, Maharashtra, 411007, India

    Arun G. Banpurkar

  3. School of Biomedical Sciences, University of Ulster, Coleraine, BT52 1SA, N., Ireland, UK

    Ibrahim M. Banat

  4. Present Address: Protein Crystallography lab (603), Department of Biosciences and Bioengineering, Indian Institute of Technology Bombay, Powai, Mumbai, Maharashtra, 400076, India

    Parijat Das

Authors
  1. Surekha K. Satpute
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Nishigandha S. Mone
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Parijat Das
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Ibrahim M. Banat
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Arun G. Banpurkar
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

SKS, IMB and AGB conceived the project and SKS & AGB achieved financial support from funding agency. SKS, IMB and AGB designed the study. SKS, NSM, PD, AGB performed the experiments and analyzed the results. All authors wrote the manuscript. All authors read and approved the final manuscript.

Corresponding authors

Correspondence to Surekha K. Satpute or Arun G. Banpurkar.

Ethics declarations

Ethics approval and consent to participate

Not applicable as no humans or animals are involved in the study.

Consent for publication

Not applicable.

Competing interests

The authors declare that they have no competing interests.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Satpute, S.K., Mone, N.S., Das, P. et al. Inhibition of pathogenic bacterial biofilms on PDMS based implants by L. acidophilus derived biosurfactant. BMC Microbiol 19, 39 (2019). https://doi.org/10.1186/s12866-019-1412-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12866-019-1412-z

Keywords

BMC Microbiology

ISSN: 1471-2180

Contact us